What To Do If Your Water Heater All Of A Sudden Stops Working
What To Do If Your Water Heater All Of A Sudden Stops Working
Blog Article
They are making a number of good pointers related to What Would Cause My Electric Water Heater to Stop Working? overall in the article which follows.
Many modern-day homes use an electric hot water heater for their heater, due to its comfort and convenience of use. However, similar to any other electrical devices, problems might occur with its use, unexpectedly. It can be truly frustrating to get up to a cool shower rather than a warm one or having your bath with water that isn't warm adequate and even also hot. Whatever the situation may be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of possible options to your hot water heater problems. There are a variety of factors that might create much of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it dealt with ought to not position way too much of an issue if you comply with these actions:
Call An Expert:
If after changing all faulty parts and also resetting your temperature, the hot water heater still isn't functioning, you may need to speak to a specialist plumber for a professional viewpoint. The issue with your heating system could be that the cold and hot faucets have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the situation might be, a professional plumber would help resolve the issue.
Examine Your Power Supply:
As standard as this might appear, it is very necessary. Without sufficient power, your water heater will not function. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, merely transform it on and off once more. Change any type of damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's now working.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to examine the temperature level settings on your upper thermostat. Ensure the breaker is turned off prior to doing anything. Open the access panel and also press the red switch for temperature level reset above the thermostat. This should assist heat the water. Turn the breaker back on as well as inspect if the problem has actually been solved.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try looking into your heating element if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any of them is damaged, change that part and afterwards inspect whether the hot water is back on.
Verdict
Hot water heater troubles are not always major. Most of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the damaged parts should suffice. Nevertheless, if you are still unable to solve the issue, give a call to your closest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I discovered that article on How to Troubleshoot and Repair an Electric Water Heater when doing a search on the search engines. Those who appreciated our blog post please don't forget to pass it around. I treasure reading our article about Hot Water Heater Repair.
View More
Report this page